Back to Basics SM600 Bedienungsanleitung Seite 111
- Seite / 234
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
6
FUNCTIONS
6.7 Self-diagnostics Function
6.7.1 LED display for error
6 - 31
1
Overview
2
Performance
Specification
3
Sequence Program
Configuration and
Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files
Handled by CPU Module
6
Functions
7
Communication with
Intelligent Function
Module
8
Parameters
6.7.1 LED display for error
When an error occurs, the LEDs on the front of the CPU module light up and flash.
( Section 6.17)
6.7.2 Cancel the error
The CPU module can carry out the operations canceling errors in programs as long as the
error allows the program operations to continue.
The occurring continuation error can be checked by the bit which is turned "1" of SD81
(error factor). Error factor/continuation error corresponding to the bit number of SD81 is
shown in Table6.12.
(1) Error canceling procedure
Cancel an error with the following procedure.
1) Read out SD81 with GX Developer and check the cause of the current
continuation error occurring in the CPU module.
2) Eliminate the cause of the error.
3) Store the canceling error code in special register SD50.
4) Turn special relay SM50 OFF ON.
5) Again read out SD81 with GX Developer and check that the bit corresponding
to the current continuation error canceled is OFF.
Table6.12 Error factor/error code corresponding to bit number of SD81
Bit number of SD81/error factor corresponding to
continuation error
Continuation error corresponding to bit number of
SD81
Bit number Error factor Error code Error message
0 Instantaneous power failure 1500 AC/DC DOWN
1 Battery low 1600 BATTERY ERROR
2 Standard ROM write count excess 1610 EXCEED MAX FLASH ROM REWRIT.ERR.
3
Test mode continuous RUN tolerance
timeout
8100 TEST MODE TIME EXCEEDED
4 Scan timeout 5010 PROGRAM SCAN TIME OVER
5 Annunciator ON 9000
F**** (**** indicates the annunciator
number.)
6 Safety remote station detection error 8300 CC-LINK REMOTE DETECTION ERROR
7
Safety remote station product information
mismatch
8310 CC-LINK PRODUCT INFO. MISMATCH
8
Initial monitoring timeout error
Safety monitoring timeout
Error menitoring timeout error
8320
8321
8322
CC-LINK DATA RECEPTION TIMEOUT
9
Safety remote station command error
Safety remote station data split error
Safety remote station link ID error
Safety remote station running number error
Safety remote station reception data error
8330
8331
8332
8333
8334
CC-LINK RECEIVED DATA ERROR
- User's Manual 1
- SAFETY PRECAUTIONS 3
- [Design Precautions] 4
- [Installation Precautions] 5
- [Wiring Precautions] 5
- [Disposal Precautions] 9
- [Transportation Precautions] 9
- REVISIONS 10
- INDEX INDEX - 1 to INDEX - 2 14
- CHAPTER12 TROUBLESHOOTING 16
- APPENDICES 17
- Chapter heading 19
- Section title 19
- Reference destination 19
- CHAPTER1 OVERVIEW 23
- OVERVIEW 24
- 1.1 Features 25
- PERFORMANCE SPECIFICATION 34
- SEQUENCE PROGRAM EXECUTION 36
- 3.1 Sequence Program 37
- 3.2 Concept of Scan Time 40
- SEQUENCE PROGRAM EXECUTION 41
- 3.3 Operation Processing 42
- 3.6 Data Clear Processing 47
- 4.1 Definition of I/O Number 54
- I/O NUMBER ASSIGNMENT 55
- 4.4 Checking the I/O Numbers 62
- 5.1 Memories by CPU Module 63
- Table5.2 Formatting necessity 64
- 5.1.2 Program memory 65
- Free space volume 67
- (4) Write to program memory 68
- 5.1.3 Standard ROM 69
- (4) Write to standard ROM 70
- 5.1 Memories by CPU Module 71
- Diagram 5.7 Boot file 72
- (3) Write to standard ROM 74
- 5.2 Program File Structure 76
- 5.2 Program File Structure 77
- 5.3.1 File operation 78
- a + 40 b 79
- 5.3.4 File size units 80
- CHAPTER6 FUNCTIONS 81
- 6.3 CPU access password 98
- FUNCTIONS 100
- 6.9 Constant scan 118
- 6.11 Clock Function 124
- 6.12 Remote Operation 127
- 6.13 Monitor Function 133
- 6.15 Watchdog Timer (WDT) 138
- 6.17 LED Display 142
- FUNCTION MODULE 143
- CHAPTER8 PARAMETERS 145
- 8.1 PLC Parameters 146
- PARAMETERS 147
- 8.2 Network Parameters 154
- CHAPTER9 DEVICE EXPLANATION 157
- 9.2 Internal User Devices 158
- DEVICE EXPLANATION 159
- 9.3 Internal System Devices 188
- 9.4 Nesting (N) 190
- 9.5 Constants 191
- 10.1 Scan Time 192
- CPU MODULE PROCESSING TIME 193
- 10.2 Other Processing Times 198
- CPU MODULE 199
- Section 9.2 200
- To Section 11.3 201
- 11.3 Boot run procedure 202
- MAIN.QPG 209
- App - 11 213
- App - 12 214
- App - 13 215
- App - 14 216
- App - 15 217
- App - 16 218
- App - 17 219
- App - 18 220
- App - 19 221
- App - 20 222
- App - 21 223
- App - 22 224
- App - 23 225
- App - 24 226
- App - 25 227
- Index - 1 228
- Index - 2 229
- WARRANTY 230
- 3. Limits on Damages 231
- 4. Delivery/Force Majeure 231
- 6. Arbitration 232
Verwandte Produkte und Handbücher für Mixer Back to Basics SM600
Mixer Back to Basics SR1000 Bedienungsanleitung
(134 Seiten)
(134 Seiten)
Mixer Back to Basics SM600 Bedienungsanleitung
(364 Seiten)
(364 Seiten)
Mixer Back to Basics SM600 Spezifikationen
(56 Seiten)
(56 Seiten)
Mixer Back to Basics FB500 Betriebsanweisung
(212 Seiten)
(212 Seiten)
Mixer Back to Basics BPE3 Bedienungsanleitung
(11 Seiten)
(11 Seiten)
Mixer Back-to-basics ™ 5000 Bedienungsanleitung
(34 Seiten)
(34 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.418 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern