Back to Basics SM600 Bedienungsanleitung PDF herunterladen (Seite 108)

6 - 28

6.7 Self-diagnostics Function

FUNCTIONS

6.7 Self-diagnostics Function

(1) What the self-diagnostics function is

The self-diagnostics function diagnoses presence or absence of an error in the CPU

module by itself.

The objectives of the self-diagnostics function are the prevention of malfunction of the

CPU module and preventive maintenance.

(2) Self-diagnostics timing

If an error occurs when the CPU module is power on or while the CPU module is

running, the self-diagnostics function detects and displays the error, and executes the

CPU module operations stop etc.

(3) Checking an error

(a) LEDlit

When the CPU module detects an error, it lights up the "ERR." LED.

(b) The storage destination and checking of the error definition

If the CPU module detects an error, it turns ON special relays (SM0 and SM1) and

stores the error definition (error code)in a special register (SD0).

If the CPU module detects multiple errors, it stores the error code of the latest

error into SD0.

Use the special relay and the special register in a program to establish the PLC or

mechanical system interlock.

(4) Checking the operation/error history

The CPU module records 3000 incidents of the operation/error history.

( Section 6.8)

The operation/error history can be checked by using GX Developer [Diagnostics]

[PLC diagnostics].

The operation/error history is backed up by battery even if the PLC is power-off.

(5) CPU module operation when an error is detected (Stop error/

continuation error)

When an error is detected by the self-diagnostics, the CPU module has the following

two types of operations.

(a) When an error that stops CPU module operations is detected

At the point when the CPUmodule detects the error, it stops operations and turns

all external output OFF. (Device memory output (Y) is held.)

The error which stops operation is referred to as a stop error.

(b) When an error that allows CPU module operations to continue is detected

Even when the CPUmodule detects the error, it continues to execute the program.

The error which continues operation is referred to as a continuation error.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 233 234

Keine Kommentare

Back to Basics SM600 Bedienungsanleitung Seite 108