Back to Basics SM600 Bedienungsanleitung PDF herunterladen (Seite 112)

6 - 32

6.7 Self-diagnostics Function

6.7.2 Cancel the error

FUNCTIONS

6) Turn special relay SM50 OFF.

(a) Error canceling procedure for multiple errors

Because the description of the error information special relays/registers (SM0,

SM1, SM5, SM16, SD0 to 26) are cleared when the last error to occur (the error

stored in special register SD0) is canceled, the information on errors that have not

been canceled cannot be obtained from the special relays/registers.

Cancel errors that have not been canceled by obtaining errors that have occurred

in the past from the error history ( Section 6.8).

(2) State after error canceled

If the CPU module is recovered by canceling the error, the special relays, special

registers, and LEDs related to errors return to the pre-error states.

The error history does not change.

If the same error occurs again after it has been canceled, it is recorded into the error

history again.

(3) Canceling annunciator

When canceling multiple detected annunciators, only the F number first detected is

canceled.

(4) Canceling errors when multiple erros occur

When multiple continuation errors occur and an error is canceled, the CPU module

LED display and error information are as follows.

* 1: (1) When error code: 1600("BATTERY ERROR") occurs, only the "BAT." LED lights up.

When error code: 1600 is canceled, the "BAT." LED goes out.

(2) When error code: 9000(F****) occurs, only the "USER" LED lights up.

When error code: 9000 is canceled, the "USER" LED goes out.

Error canceling state

LED display Åñ1

(ERR. LED, BAT.LED, USER LED)

Error information

(SM0, SM15, SM16, SD0 - 26)

Before error canceled ON The error information for the continuation

error that occurred last is stored.

The continuation error that occurred

last is canceled.

(There are continuation errors

remaining that have not been

canceled.)

ON Returns to the no-error state.

A continuation error other than the

last one is canceled.

(There are continuation errors

remaining that have not been

canceled.)

ON No change

(The error information for the continuation

error that occurred last is retained.)

All the continuation errors are

canceled.

OFF No error

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 233 234

Kommentare zu diesen Handbüchern

Keine Kommentare

Back to Basics SM600 Bedienungsanleitung Seite 112

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mixer Back to Basics SM600